CHM-T510LP4 Pick And Place SMT Placement Machine For 1.2m LED PCB Board
Pick and Place Machine for PCB Assembly
Pick and place machines are used for PCB assembly where they take components in reels or tubes or on flat packs and place them on the board as defined by software generated from the PCB files.
| CHM-T510LP4 Specifications |
| Dimensions | 2060mm(L)×605mm(W)×700mm(H) |
| Weight | 145kg |
| Power Supply | AC220V (50Hz, single phase)/AC110V (60Hz, single phase);400W |
| Air Supply | 0.5MPa ~0.7MPa |
| Vacuum Generation | Built-in vacuum pump |
| Mounting Head Quantity | 4 |
| Mounting Speed | 11000cph(optimalwithout vision detection); 5500cph (optimal with vision detection) |
| Control Accuracy | 0.015mm |
| Component Type | 0402/0603～5050/SOT/SOP/QFP/QFN/BGA, etc. (resistor/capacitor/diode/triode/LED/IC, etc.) |
| PCB Thickness | 0.6mm~3.5mm |
| PCB Size | 10mm(L)×10mm(W)～1200mm(L)×240mm(W) |
| PCB Conveying | Manual operation |
| Nozzle Change | Manual operation |
| Control System | Built-in computer (embedded Linux operating system), 7-inch touch screen |
| Drive System | X&Y-axisdriven by stepping motors in the way of closed-loop control; Z-axis capable of reset detection;all motors adopting flexible S-curve acceleration and deceleration |
| Transmission System | Synchronous belt+linear guide |
| Feeding System | 8 Yamaha standard pneumatic feeder stacks, Yamaha electric feeder supported |
| Vision System | Up-looking camara for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning |
Machine description:
CHM-T510LP4 is an professional LED design pick and place machine. with 1.2M moving table, it has 4heads and 8pcs Yamaha feeders.
This machine is not only for LED patching work, also can work with 0402. 0603, 0805-5050, SOP, QFN, LQFP, Diode, Transistor.
within embedded industry PC and Linux system. the main board of the machine was developed by ourselves, with good quality and long lifetime. Please buy with confidence.
Automatic of EX axis
High speed movement can assemble a PCB of 1200mm length
High speed movement, highly accurate
Magnetic plate positioning
Check make point visually and automatically, effective and accurate
EX axis covered by magnetic plate, can suitable for various PCB of different size and shape, precise positioning, good performance, easy operation
8pcs Yamaha pneumatic feeder supported
simple & convenient operation
CHM-T510LP4 work with standard Yamaha pneumatic feeder ,it is more stable and longer lifetime. pneumatic feeders can improve the working efficient a lot.
Closed-loop Motion Control System
it can be four-axis linkage, move faster and smoothly. both nozzle can working together, not single nozzle working any more, support single step. X,Y axis encoder installed, never lose step. Flexible S accelerate and decelerate, make sure high speed placement working perfectly.
Hunan Charmhigh Electromechanical Equipment Co., Ltd.
Phone: +86 731 85504084
Fax: +86 731 85504064
Karl Liang:
Mob: +86 18100733752 Wechat:+86 18100733752
Whatsapp:+86 18100733752 Skype:+86 18100733752
Add: 104-604,Building D, Jindao Industrial Park,No.179 Huizhi Middle Road,Hi-tech Development District, Changsha, Hunan, China
Product Tags:
|
|
CHM-T510LP4 Pick And Place SMT Placement Machine For 1.2m LED PCB Board Images
|
